60 W SINGLE OUTPUT INDUSTRIAL DIN RAIL POWER SUPPLY 12 V 4.5 A - FOR PROFESSIONAL USE ONLY

  • PRODUCT NAME:

  • 60 W SINGLE OUTPUT INDUSTRIAL DIN RAIL POWER SUPPLY 12 V 4.5 A - FOR PROFESSIONAL USE ONLY

  • ART NO:

  • DR-60-12

  • Description:

  • Features:
    • Universal AC input / full range
    • Protection against: short circuit / overload / overvoltage
    • Cooling: free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508 (industrial control equipment) approved
    • Isolation class II
    • LED indicator for power on
    • 100 % full load burn-in test
    • 3 years warranty
    • For professional use only.
    • This device must be installed by a qualified person.
    Specifications:
    • Output:
      • DC voltage: 12 V
      • Rated current: 4.5 A
      • Current range: 0-4.5 A
      • Rated power: 54 W
      • Ripple & noise (max.): 120 mVp-p
      • Voltage adj. range: 11.1-13.2 V
      • Voltage tolerance: ± 1.0 %
      • Line regulation: ± 1.0 %
      • Load regulation: ± 1.0 %
      • Setup, rise time: 100 ms, 30 ms / 230 VAC 200 ms, 30 ms / 115 VAC at full load
      • Hold up time (typ.): 100 ms / 230 VAC 23 ms / 115 VAC at full load
    • Input:
      • Voltage range: 88-264 VAC 124-370 VDC
      • Frequency range: 47-63 Hz
      • Efficiency (typ.): 82 %
      • AC current (typ.): 1.2 A / 115 VAC 0.8 A / 230 VAC
      • Inrush current (typ.): cold start 18 A / 115 VAC 36 A / 230 VAC
    • Protection:
      • Overload:
        • 105-160 % rated output power
        • Protection type: constant current limiting, recovers automatically after fault condition is removed.
      • Overvoltage:
        • 13.8-16.2 V
        • Protection type: shut down output voltage, re-power on to recover
    • Environment:
      • Operating temperature: -20 to +60 °C
      • Operating humidity: 20-90 % RH non-condensing
      • Storage: -40 to +85 °C, 10-95 % RH
      • Temperature coefficient: ± 0.03 %/°C (0-50 °C)
      • Vibration: 10-500 Hz, 2G 10min/1cycle, period for 60 min each along X, Y, Z axes; mounting: compliance to IEC60068-2-6
    • Safety & EMC:
      • Safety standards: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
      • Withstand voltage: input to output: 3 kVAC
      • Isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
      • EMC emission: compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
      • EMC immunity: compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A.
    • Others:
      • MTBF: min. 216,200 h, MIL-HDBK-217F (25 °C )
      • Dimensions: 78 x 93 x 56 mm
      • Packing: 0.3 kg; 48 pcs / 15.4 kg / 1.02 ft³
Quantity
Back to Products